#01Aug 31, 2026
cs.CV
Rad-R: A Raw-ADC Radar Dataset and Capture-Invariant SSM for Hardware-Fault Diagnosis
Mainak Mallick, Junghwan Yim, Seung-Kyum Choi
Automotive mmWave radar can develop vibration, antenna misalignment, radome blockage, and receive-channel degradation that corrupt the signal before perception begins. Data for these faults are scarce because each condition must be induced and measured on physical hardware. We introduce Rad-R, a raw-ADC dataset captured with a 4-chip 77GHz TI MMWCAS-RF-EVM cascade (192 virtual channels). Unlike existing raw-radar datasets, Rad-R pairs each recording with a controlled hardware fault at a calibrated severity, an independent physical severity measurement, and frame-synchronised IMU, temperature, GPS, and camera streams. Rad-R is a single-session dataset, so our generalisation claims are confined to a controlled cross-severity protocol in which train and test use physically distinct captures. A reproducible benchmark evaluates seven representative vision backbones and the proposed raw-IQ Mamba SSM (RadrNet) under within-clip, chirp-wise anytime, few-shot cross-capture, and controlled cross-severity protocols. Within-clip performance is near-saturated ($>0.98$ macro-F1), whereas cross-severity generalisation remains difficult: the absolute-phase RadrNet-DS falls to $0.49$ macro-F1. RadrNet-DS-CI replaces absolute phase with per-frame-standardised magnitude and relative chirp-to-chirp phase and ranks first on the controlled benchmark ($0.663$ vs. $0.628$ for the strongest RD-CNN; three seeds); the RadrNet family also leads on the anytime and few-shot budgets. A descriptive cross-modal analysis further finds that radar micro-Doppler covaries with independently measured IMU vibration energy (pooled Spearman $ρ=0.41$ across conditions). The complete dataset and code will be released publicly under permissive licences.
#02Aug 31, 2026
cs.CV
Multi-View Reflective Surface Inspection via Semantic-Saliency Cross-Verification
Van-Giang Nguyen, Thanh-Tuan Tran, Xuan-Hieu Phan and 1 more
Reflective smartphone cover glass is challenging to inspect from a single fixed viewpoint because defect visibility varies with viewing geometry and specular reflections. This gives rise to two practical challenges: defects may be weakly observable from certain viewpoints, while the available visual evidence may remain spatially ambiguous. To address these issues, we propose a multi-view inspection framework in which each RGB observation is processed by a shared per-view expert. A vision-language model (VLM) produces class-aware semantic boxes, while a normal-reference reconstruction branch provides class-agnostic saliency. Their spatial agreement is used as supporting evidence to rank semantic proposals without modifying their coordinates or treating saliency as ground truth. The resulting evidence records are combined at product level without cross-view registration. On 282 production-line images, semantic-saliency association improves $AP_{50}$ from 52.6% to 62.6% by re-ranking fixed semantic proposals. Across 94 products, cross-view evidence recall $R_{\rm prod}@0.5$ increases from 75.5% for the best single view to 88.3% using all three views. These results support the complementary roles of semantic-saliency cross-verification and additional optical observations in reflective-surface inspection.
#03Aug 31, 2026
cs.CV
Driving on Memory
Christian Löwens, Thorben Funke, Alexandru Paul Condurache
End-to-end autonomous driving models plan future trajectories from raw sensor input. While earlier driving benchmarks often measured deviation from the human trajectory, current benchmarks such as NAVSIM and Bench2Drive evaluate models with richer simulation-based metrics intended to capture safe and compliant driving. A high benchmark score should reflect that a model can understand the scene in front of it and act accordingly. But how much of that score specifically comes from reacting to the dynamic part of that scene? To probe this, we remove a model's camera input and replace it with memories from prior drives at the same location. The retrieved memories can provide persistent scene information, including road layout and location-conditioned regularities, but not the current traffic state. Surprisingly, memory is nearly sufficient on NAVSIM, reaching or even exceeding the performance of leading end-to-end methods without actually observing the evaluated scene. Our results suggest that a high NAVSIM score does not require a planner to react to the current traffic scene and should be treated with caution. This effect is benchmark-dependent: driving from memory causes substantially larger performance drops on Bench2Drive and RealEngine. We provide our code at https://github.com/boschresearch/MemoryDrivoR .
#04Aug 31, 2026
cs.CV
From Intent to Evidence: Policy-Steered Multi-Strategy Retrieval for Long-Video Agents
Can Zhang, Baofeng Zhang, Xiaotian Han and 5 more
Existing long-video agents acquire evidence through one uniform behavior, ignoring whether the required evidence is concentrated, requires broad occurrence coverage, or must discriminate competing hypotheses---which can cause failure before substantive reasoning begins. Prescribing a fine-grained solution procedure for every question is not a satisfactory remedy, as it restricts autonomous exploration. We propose VESTA, a training-free long-video agent organized as a route-conditioned acquire--verify--consolidate loop. Before exploration, an intent router infers an evidence-acquisition policy---focused, recall, or contrastive retrieval over a shared visual--speech scene index---together with an evidence-accounting policy that configures the evidence view maintained during exploration. Policy-steered retrieval yields provisional references that multimodal evidence operations convert into observations, while the Reasoner remains free to verify them, re-query using intermediate findings, or inspect regions outside the retrieved set. A temporal evidence ledger consolidates observations into an adaptive, compressed view of temporal location, provenance, coverage, conflicts, verification outcomes, and hypothesis support, exposing missing and unresolved evidence to guide subsequent acquisition; finalization prioritizes verified observations. On Video-MME-v2, VESTA improves average accuracy by 2.7 points over VideoARM and gains across all six reported metrics. On LongVideoBench, EgoSchema, and LVBench under shared query-time models, it improves by 6.9 points on the LongVideoBench long subset and 1.5 on LVBench, and matches VideoARM on EgoSchema.
#05Aug 31, 2026
cs.CV
FaceSnap: Real-Time Personalized Lightstage Facial Performance Capture
Rukhshanda Hussain, Noé Artru, Emeline Got and 6 more
Lightstage facial capture produces production-quality digital humans, but it is resource and labor-intensive. Multi-camera setups, hours of computation, and massive data storage create bottlenecks that hinder iterative workflows. This paper introduces FaceSnap, an end-to-end framework that streamlines capture via a two-stage approach. First, a one-time multi-view optimization from a range-of-motion sequence builds a personalized model encoding both geometry and expression-dependent appearance. This model then enables high-fidelity real-time facial performance capture from a single monocular lightstage camera, with no further multi-view capture required. FaceSnap jointly estimates geometry and dynamic 4K texture at 83 fps. The 4K texture is produced by a novel personalized residual upscaler that recovers subject-specific high-frequency detail, which generic upscalers fail to capture. FaceSnap achieves geometric accuracy competitive with full per-frame multi-view optimization while outperforming feed-forward methods trained on production-quality 3D data, all from a single camera view. Finally, we introduce Multi4D, a public benchmark for evaluating 4D facial reconstruction methods in lightstage environments, enabling topology-invariant geometric comparison across methods.